High Strength Nails-Free Multipurpose Constrcution Grade Liquid Free Nails Joint Mastic Sealant

• Customization: Available
• CAS No.: 1317-65-3 & 216597-12-5
• Bonding Function: Structural Adhesive
• Model NO.: MS-1315
• Application: Construction, Woodworking
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Modified Silane
• Characteristic: Waterproof
• Promoter Composition: Tackifier
• Composition: Organic Material
• Color: Grey
• Component: One Component
• Curing Conditions: Moisture Curing
• Colors: White/Grey/Black
• Feature1: Formaldehyde-Free
• Feature2: Strong Adhesion
• Feature3: Strong Aging Resistance
• Voc: ≤50g/L
• Transport Package: Carton
• Specification: 280ml/300ml/310ml/590ml/600ml
• Trademark: AEP
• Origin: Xiamen, China
• HS Code: 3506100010
• Production Capacity: 10000 Tons
• Package Size: 36.00cm * 26.00cm * 21.00cm
• Package Gross Weight: 17.300kg

Product Description

About Products:
A one-component strong nail-free adhesive based on Polyether modified silane, which has good bonding properties to metal, ceramics, stone, wood, glass, some ABS plastics and other materials.

The main purpose:
It is used for fixed bonding of aluminum buckles, aluminum-plastic panels, hardware pendants, picture frames, advertising letters, ceiling materials, decorative lines, home decoration stones, skirting boards, all-aluminum furniture, etc.
 

MS Nail-Free Adhesive - TDS Forms
Test items						Technical indicators		Note
Appearances		Colors				Black/White/Grey		Colours can be customised
		State				Delicate cream		Visual assessment
Density		g/cm³				1.4±0.1		GB/T14683.2
Extrusion rate		ml/min				≥450ml/min		GB/T 13477.3
Shifting		vertical sag				≤1mm		GB/T 13477.6
Curing speed		Surface drying time				40~100min		GB/T 13477.6
		Initial 24 hour cure depth				≥2mm
Hardness		Shore A				50±5A		GB/T531-2008
Tensile Stress Strain		Tensile strength(TS)				≥0.75Mpa		GB/T14683.8
		100% Tensile strength(M100)				About 0.30 Mpa
		Elongation at break EB (%)				≥400%
Elastic recovery rate		According to the 25LM class				≥75%		GB/T13477.17
Constant elongation bonding		Substrate: Concrete mortarboard				Non-destructive		GB/T 13477.10
Adhesion after cold pulling and hot pressing		Substrate: Concrete mortarboard				Non-destructive		GB/T 13477.13
Elongation bonding after immersion in water		Substrate: Concrete mortarboard				Non-destructive		GB/T 13477.14
Curing Shrinkage		Quality loss rate				≤3%		GB/T 13477.19

Instructions for use
1.Before construction, the grass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.
2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.
3.Adjustment should be completed within ten minutes after dispensing.
4.The product room temperature curing, surface drying time: 45Min, full curing time: 72h.
5.Application temperature range: -40ºC-+100ºC.

Precautions
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.

Features:

1.Strong bonding
 
2.Fast cure 

3.Good waterproof

4.Green Low VOC

5.No need to drill holes
 
6.Easy installation  

7.Comply with EU standards
 

[AEP] is a brand of Anbanb Group, which is specialised in adhesive research and development, production, application and optimisation of customer's usage solutions, serving microelectronics/electronics, industry, automotive, new energy, new home decoration, 3D printing and other fields.
The company takes customer as the centre, quality as the fundamental, innovation as the vitality, and is committed to developing into an adhesive enterprise trusted by customers. We have won the honours of National High-tech Enterprise, Xiamen High-tech Enterprise, Growing Enterprise, Speciality and New Enterprise, Intellectual Property Demonstration Enterprise, New Material Enterprise, and Demonstration Enterprise of Scientific and Technological Project Products.

Q1.:Can I get the Adhesive samples?
A1.:Sure,We can provide you free samples.

Q2.:How to find the most suitable product for me?
A2.:Please tell us about the use or application of the adhesive you are purchasing, and we        will recommend the right adhesive for you.

Q3.:Can you provide OEM service?
A3.:Yes, we can provide you with OEM service to customise your own branding and outer          packaging.

Q4.:What is your delivery time?
A4.:For OEM order,delivery in 20-30 days.

Q5.:What is your terms of payment?
A5.:30% deposit in advance,70% paid in before shipment.

Q6.:What is the shelf life of your product?
A6.:12 months.